|
| If it's sucking that much air here is what you do.
Carefully and easily use a rubberized air nozzel and give short small shots of air into you fuel tank vent line. Like 1 psi on the tank is all you need. That will pressurize you suction lines and create a leak. Find the leak. Seen many leak on the t fitting where the two suction lines from each tank converge. But in reality it could be anywhere up to the primary filter.
Also make sure you have either the updated filter base with the longer threaded piece . A cat filter has a oring to seal the threads. Some non cat filters don't and that oring is very important to seal the threads.
Also the updated base was PIP and they new one was also higher flow.
Edited by StxPecans 5/23/2020 22:39
| |
|