|
| Hopefully someone will chime in with more info than I have, but when I set up my Hagie with Field IQ, I spent 2 days trying to get the pump to turn on. No one could figure it out, until somewhere in the set up I found a setting for an "arm pump" switch. Once I added the "arm pump" switch, I just had to push the virtual button and I heard a slight click on the right panel and the pump started working. Sometimes when I enter a new field I have to hit the arm pump switch a couple times to get it to start going but it usually just needs to be pressed once. There should also be one in the lower left corner in your diagnostic screen, if there is not, go into the settings and make sure you have one.
If you want to turn the pump on to agitate, you have to click the rate button from 1,2, down to M (manual) Then hold up on the + button to get the pump to turn on and make agitation pressure. You have to have the arm pump virtual switch engaged to do this too.
Edited by IlliniFarmr 4/8/2020 17:52
| |
|
Field IQ won't turn on pump Hagie STS12
