|
Northeast Indiana | fixing the slop in the row unit bolt holes. Had about 8 of the rear 12 units where bushing wore from weight of all the extra crap hanging on the unit. Which then made the bolt loose and egg shape the hole. Mainly just lower two holes.
1st pic
Cleaned up egged hole
2nd pic
Welded shut
3rd pic
Smoothed out
4th pic
Marked and ready to cut new hole with mag drill and slugger bit
5th pic
Finished
6th pic
New air bag brakets and parallel arms
7th pic
Row unit
Edited by massey175275 4/8/2020 06:00
(20200407_184953 (full).jpg)
(20200407_185202 (full).jpg)
(20200407_185310 (full).jpg)
(20200407_185456 (full).jpg)
(20200407_185652 (full).jpg)
(20200404_114432 (full).jpg)
(20200404_114425 (full).jpg)
Attachments ---------------- 20200407_184953 (full).jpg (212KB - 18 downloads) 20200407_185202 (full).jpg (206KB - 19 downloads) 20200407_185310 (full).jpg (188KB - 24 downloads) 20200407_185456 (full).jpg (137KB - 15 downloads) 20200407_185652 (full).jpg (197KB - 15 downloads) 20200404_114432 (full).jpg (194KB - 17 downloads) 20200404_114425 (full).jpg (156KB - 14 downloads)
| |
|