Hitchcock SD | bleedred - 3/25/2020 19:58
I am switching a Great Plains planter over to Ag Leader from a Dickey John Seed manager SE which is can bus.
Any way to get the bulk fill fan speed and low bin hopper sensors connected?
It sounds like these are only supported with the Strip Till module or the new newer system with a module on every row.
bleedred
My dealer built me a small box with a light for each tank of my planter. A small 4 wire ran back to the tanks where I installed a sensor. It’s only good for a low tank warning but it’s better than nothing. If you’re interested, I can get some pictures.
Doesn’t help you with fan speed but would with low bin warning. |
Any way to get Fan speed and low bin level sensors into Ag Leader planter monitoring?
