|
| Made up mine own. You need an switch that centers in the middle that way you can flip it up to shut one side off or down to shut the other side off. You will need a power supply from which to power it. You then need to run wires back to the half width disconnect, I used an old electrical cord with the ends cut off, I used this to not have to worry about anything rubbing thru. Remember this, it shuts off the half width disconnect when power is ran thru it thus shutting off one side of your planter. It is basically a simple thing to do and cost is minimal. This is what I did on mine. Auto parts store for a switch and some electrical connectors and you are in business. Hope this helps. | |
|
John Deere 1760 Half Width Disconnect harness
