|
SC MN | The port by the 3pt arm works great!! Book says it will provide 12 to 15 gal/min for operation.. you will need to also run a constant flow on remote #1 to keep the system activated so the power beyond will work..
If you are not using all of your remotes.. then run your motor through a remote.. but if your remotes are occupied, then use the power beyond port.. once you get your head wrapped around how the hyd system works its simple to understand.. I’ve done a lot of research on this.. with the help from people on this site.. if I knew what your running I could explain what to do..
| |
|
8970 power beyond
