Ladoga, IN, United States, North America, Earth | L8Bloomer - 3/11/2009 09:32
As a dealer you have to work with what they give you... programing and all. As one who has done some industrial programing I say it's a relatively simple task to program a planter mode where the outputs are "inverted". Of course all things need to be considered; memory space and effects on related areas of the program. I'm sure they could and I think they should. Cost of development and the number of users who need it are probably what they look at. Right now many users just use relays so the need is relatively small.
Dave
How would you program a switch box to invert itself without a module after it to do it? The switch box is on its own and seperate and only communited to through CAN system. Master is on, and when the row unit itself is on it is outputting 12 volts. So you would have to rewire it physically since it can be controlled manually. Unless I'm missing something completely here, I just don't see how you can program the ez-guide 500 to invert the power the ez-boom sends out. |
EZ 500 controlling true counts and variable rate drive
