Posted 2/19/2009 20:30 (#615638 - in reply to #615259) Subject: RE: 2 third party wires for GS2??
To setup RS232 COM 1 on the 2100 or 2600: RS232 Wire Display Connector Pin # Blue Pin 23 = Rx Green Pin 22 = Tx White Pin 25 = CTS Red Pin 24 = RTS Black Pin 2 = Ground
To setup RS232 COM 2 on the 2100 or 2600: RS232 Wire Display Connector Pin # Blue Pin 15 = Rx Green Pin 26 = Tx White Pin 17 = CTS Red Pin 16 = RTS Black Pin 4 = Ground
Has this harness been used for something else before?