|
Cass Co. ND | Remember there is a valve and a sensor at every cylinder. If any wire gets damaged, the cultivator will not work. There is no way to jerry rig it to get by either. There is only 2 cures. Fix the wiring, the sensors and the valves every time a mouse chews a wire or mud tears one off. Or replace every cylinder, and replumb to make it re-phasing. To the tune of about $800+ per cylinder, and another $500 for the single point depth valve and control. Factor that in to your offer.
Other than that, it's a great cultivator!! | |
|
Jd 2200 with accra depfh
