|
NE Nebraska | Picture 4 needs the brown 12 pin connector with the 1 pink wire going into it plugged together with the mate from the common harness on the same module. Second, power and can plugs should daisy chain from tractor harness to first module in, first module out to second module in, second module out to third module in...... also, double check which seed harness you have. As mentioned, there is a Dickey John and a John Deere seed tube harness through Trimble but they have different part numbers. Make sure you have the right one for your planter. Lastly, I always put the modules in number order to how I want my controllers assigned so setup is easier not having to write down the complete serial number. Make sure the module is assigned to the correct product configuration. | |
|
Fmx and field iq help needed.
