|
SC North Dakota | I’m running a jd rate controller on a raven accuflow with a 2630 screen. The problem is when I lift at the headlands and turn around the system seems to hunt way high to way low without ever coming close to finding the target rate. If I slow down to 4-4.5 mph the system will catch up and then I can run back up to 6 mph and hold the target rate. It’s a one valve system. Valve cal is 743 and the meter cal is 680 I have the smoothing on and set at 3%. Any help with this is appreciated. | |
|
John Deere rate controller for accuflow system
