|
Butterfield, MN | That's likely too old to have the SP2 option, but I don't think it actually displayed SP1 when you held the Self Test button if it didn't have the option. The old ones wouldn't let you into that mode without fully resetting the console. Make sure you go through all your buttons on the top row and write down the settings. Then turn off the power switch, hold the CE button, and while holding it turn the power switch back on. This should clear everything out and you can enter it back in again. The speed option should be one of the first ones, and you can switch it from SP1 to Sp2 by tapping the CE button. | |
|
Can't change to SP2 on Raven 440
