|
| I started out with RTK and a 2600 display in 2007 and know how to use APEX to upload and reload cards and thumb drives for other JD displays . Found out APEX does not work with Gen 4 displays. so I have backed up and stored all my guidance lines from Apex into a new MY John Deere account. I see my guidance lines in Land Manager, and I am not sure how to get my guidance lines out so I can put them on the 4640 display. I have used the same guidance lines since the gps system was bought in 07. I would appreciate it if someone could share how to accomplish this. Any help would be appreciated. TIA!
Edited by tadpolejcb 4/22/2019 06:16
| |
|