|
| Ran my own numbers to check back against the soil labs, and they are high on most all the %CA where the PH his in the upper 6's to 7's, and low on the CA where the PH is 6.5 and lower?? But the % MG is dead on. How can this be?
Also running Kinseys TCEC where the PH is above 7 , the CEC is at least 2 CEC high. Why didnt the soil lab use a different test if they see PH above 7? Obviously the Mehlich doesnt work then.
But how could the % K and % MG be dead on, while the %CA are all low? Must have to do with the % H that is missing? | |
|
About the field below with high %MG numbers
