AgTalk Home
AgTalk Home
Search Forums | Classifieds (75) | Skins | Language
You are logged in as a guest. ( logon | register )

Accu-plant Rawson
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 2/8/2009 06:23 (#600633 - in reply to #600315)
Subject: RE: Accu-plant Rawson


Near Intersection of I-35 & I-90 Southern Mn.
jonbickel - 2/7/2009 19:09

No, the newer systems will only run the accurate dirves not the accuplant drives.


I believe an earlier post referred to using an Insight with the Accu-plant system. In this arragement the Accu-plant box is still used but is connected via a serial connector to the Ag Leader App Rate Module. I believe this would allow for a VR planting situation since an Rx map could be read by the Insight which passes the rates to the Accu-plant box. The Insight would display "what it believes" the Rawson drive is doing but is not directly receiving the information from the drive(s).

This setup would be in contrast to removing an Accu-rate box and replacing it with the Stepper Control Module. In this setup, the Rawson box is not used and the Insight system controls the drive(s) directly. This setup is not allowed with the Accu-plant system.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)