Idaho | The one thing I find interesting is they do not tilt the rear wheels to stay level with the hill like the front ones do. Does cost more to do that for sure. The IHC 151, 403, and 453 could be had with 4 way leveling. When they came out with the 1470 and later 1670 they were only 2 way leveling. Some pictures when we had to remove the clean grain elevator from the 453. The 1470 pictures leveled to the left were on a dealer lot. The small ones off the net. Believe the 1470 levels to 48%. The wheels front and back level with the hill on the IH design.
Edited by IHC 1470 2/14/2019 22:42
 (Cropped453LBit (full).png)
 (SayAW1 (full).JPG)
 (HillClimb (full).JPG)
 (post-6794-0-60246400-1353301037 (full).jpg)
 (post-6794-0-86214800-1353300709 (full).jpg)
 (download (full).jpg)
Attachments
----------------
 Cropped453LBit (full).png (29KB - 31 downloads)
SayAW1 (full).JPG (166KB - 19 downloads)
HillClimb (full).JPG (57KB - 33 downloads)
post-6794-0-60246400-1353301037 (full).jpg (122KB - 32 downloads)
post-6794-0-86214800-1353300709 (full).jpg (115KB - 26 downloads)
download (full).jpg (7KB - 32 downloads)
|
Combining with a pucker factor!
