AgTalk Home
AgTalk Home
Search Forums | Classifieds (188) | Skins | Language
You are logged in as a guest. ( logon | register )

Anyone know about buildings from "Steel Tech of the Ozarks"?
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
dpilot83
Posted 2/13/2019 16:35 (#7318597 - in reply to #7318500)
Subject: RE: Anyone know about buildings from "Steel Tech of the Ozarks"?



tanner - 2/13/2019 15:10 Try all steel, or all steel buildings in Topeka, ask for Kirk. He will spec whatever you might want.

Thanks. He gave me general numbers which helped a lot. He said:

1. Stem wall and piers run you $50 to $60 per linear foot

2. 20' tall building assembled with NO doors is around $9.50/square foot if it's a big building

3. 24' wide by 18' tall bi-fold doors run you $7,000 per door.

That is enough information to get in the ballpark. There is some that needs to be done before the stem wall and piers of course (site prep) and there is a ton that needs to be done afterwards if you want to turn it into a shop but that's the basic structure to get you started and put your equipment under a roof.

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)