|
Central WI | We have a 46 ft DMI. Used to pull it with a 9390, played with it. Updated to a 335 magnum with huge tires and weighted down, was a nice match until the weight bracket saw water. Went to a T9030 and it was matched great. Going back this year to a t8.420 or a 380 magnum. 335, t9030 and the next one are all tuned too. DMI cultivators pull hard, they have lots of wheels on the ground that stop in the mud but built very good. No way a 8430t pull a 50 ft
Believe the operators manual says like 8 hp per ft, or like 3.5 pto hp per shank but I'd have to re-look again
Edited by RossAxialFlow 2/9/2019 14:08
| |
|