|
North Dakota | I'm not positive, but I believe the 3320 is before the sprayers were set up for canbus control. You would need one that had a Raven 5000 to have canbus rate control. I would say you can do it but would need a Raven stand alone system and I'm not sure if that would work with a 700. I would think you would have to install lots of harnesses to get it up to speed.
Probably a more cost effective solution would be to run the 700 in all-makes mode with a Trimble platform installation and use Accu-control to run the rate and section control. Accu-control is just Trimble field-iq run with a 700. There would be about $2000 in unlocks to do this. | |
|
|