|
Central Ohio | I don't have a record of what the differences were before I recalibrated.
I'm using firmware 5.0.0.0.
On the last 18 loads, the weights varied from +4340 to -5479, averaging -885 on approx 61000# loads.
The percent error went from +7.47 to -7.57, averaging 1.29.
Should I clear the old cal loads and use some of these latest loads for cal loads?
How long should a cal hold before you need to recalibrate?
I've done this before so it seems like I'm chasing a moving target. | |
|