Near Intersection of I-35 & I-90 Southern Mn. | Rayl - 1/16/2019 10:55
Mine uses one hose to raise and lower. Two for markers
Yes, you are correct it's been a while. We used to pull a 7200 with a 4230. As I recall there was a nut which acted as a cap that we had to remove to expose a screw that adjusted the drop rate so that single action would work properly. Then the cover nut was replaced. Later if we wanted double action again for another implement, we had to remove the cover nut again and turn the screw the opposite direction to go back to double action for the main SCV. This was on the lower left portion of the tractor rear end ahead on the left drive wheel. |