|
Madision County, IL | I would add a couple of Ez-Guide 500/Ez-Steer combos with waas corrections. Try waas for a while. If you aren't satisfied with waas you can always upgrade to omnistar in the future. The Ez-Steer can easily be moved between vehicles and send NMEA messages to your intelliview displays for a whole host of precision ag capabilities.
Ez-steer should work on all of the machines you listed in your post. You can also use it in the older Massey without having to invest in the tractor.
Do you use markers on you 60 foot air seeder? If not, it can see how having Ez-Steer would significantly reduce fatigue fatigue and overlap. Your seed costs should also decrease.
We have an Ez-Steer in our combine with a grain platform. It does a good job of making sure we take a full swath while improving yield monitoring accuracy. We also use Ez-Steer in our tractors and it is very accurate if you spend some time calibrating the system. However, it would be nice to have the line acquisition capabilities of an Autopilot.
You may want to consider the Trimble FMX Display with Ez-Steer. I don't know a lot about this product but is seems very expandable and should make it easy to store and recall a-b lines for future use.
Good luck!!!!!!!
Jay
| |
|
Looking for suggestions
