|
Fargo, ND | I'm confident you should be able to run the SonicTrakk on just about any VT (C2100 included). If I recall, the C2100 connector and power pinning is the same as many common Wachendorff display harnesses.
If you only need to use the C2100 as a VT in the tractor, Reichhardt makes a harness for the Wachendorff A6e (P/N 703427) which would loop into the standard SonicTrakk main harnessing and also fit to the C2100. The only difference between the A6e and C2100 wiring in this instance is which CANBUS you'd need to connect to, which would involve moving two wires at the display connector.
| |
|
VT with AGCO C2100
