Posted 10/21/2018 22:41 (#7058757 - in reply to #7058730) Subject: RE: Can't get GPS signal from ez 500 to Intelliview plus 2
roaming
Rolling Prairie - 10/21/2018 21:22
Can B I think. Not in the combine, and left the manual there.
Needs to be RS232-B, assuming you're connected to the 9-pin connector on the bottom of the display. If you're connecting to the 10-pin connector in the fuse panel, then it's RS232-A.
Can't get GPS signal from ez 500 to Intelliview plus 2
