|
Morris, Mb. | I am trying to put anhydrous on. I am using a Mueller node running through the iso to the Pro700 to apply the anhydrous. This is with a 2011 tier 4a quadtrac. The speed is correct then it will jump down to 0 or up to 75 mph. The 700 shows the correct speed for the tractor all the time as wheel or gps. My radar does not work so I am sending gps speed through the iso settings. On the controller for tractor speed in settings, if I set it to radar I get no reading on the a post. If I set it to wheel or gps I get a speed reading. | |
|