Posted 7/14/2018 09:27 (#6869302 - in reply to #6827507) Subject: RE: Raven Envizio Pro rate problems
Eastern Washington
Could check wiring to flow meter... I was told (need to test mine), undo the round plug on the flow meter, put tab at top, with controller on, should have 5v between pin @ 2 o’clock and pin at 6, and 5 v between pin 2 o’clock and pin 10... 2 o’clock pin is ground I believe, one of the others is signal... I have not done this yet, but probably will by Monday.