AgTalk Home
AgTalk Home
Search Forums | Classifieds (2) | Skins | Language
You are logged in as a guest. ( logon | register )

Pro700 boundary creation
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Howick
Posted 6/11/2018 23:27 (#6807807)
Subject: Pro700 boundary creation


Is there a simple way to create a boundary from a coverage map?

As I understand it, it is easy to create a boundary from a swath, but what if you have seeded a paddock without necessarily having seeded right out to any swath mark. Then you want a boundary of just the seeded area for later spraying or harvest.

The obvious solution is to have recorded a new boundary when seeding the outside lap, but if that wasn't done, does anyone have any other solutions?

Another option could be to use the AFS desktop software to make a boundary but that would be very tedious.


I could also export a ISOXML file and extract the GPS data from the outside lap, then use that to create a shapefile. I would probably need to allow for the GPS positions being that of the tractor, not the edge of the seeder. I am quite happy to do this however a simpler solution is preferred

Bruce
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)