Posted 6/11/2018 19:01 (#6807125 - in reply to #6802287) Subject: RE: Planting Map issues with Pro 700
Had the exact issue you do. Stupid looking maps with overshoots on the ends, will be interesting if variety tracker works, also problems with it in the corners occasionally. Last year they had the software so it goofed up whenever you backed up. So Case IH guys, 3 years ago it worked perfect, fix it and yes you do have a problem in the software. Stake my life on it that there is a problem so don't waste our time denying it, just admit it and fix it. Along with the corner thing occasionally the outside rows would shut off in the middle of the field if the line got a little squiggly. It never used to do that also.
So while I am at it, on the positive side, used the sprayer software in a new Holland sprayer, always used the raven viper systems before and was happy with them, however all our borders (waterways) are marked in with the trimble system. The sprayer software worked beautifully. Ends, corners overlaps, backup, etc. And most importantly the waterway boundaries worked well, still marked them out, but you can drive right on through and the system would stay shut off with out touching a switch. Any screws ups were simply because the boundary control was not turned on. We usually shut it off when going around the outside or once in a while it would shut a nozzle off on the outer edge if it was outside the boundary. Only problem with this is if you forget to turn in back on and drive through a waterway without touching a switch like we are now used to.