|
| I have been running E-pro for several years. Bought new sprayer and I am using my old E-pro. What is happening is when coming into next pass to spray, the very outside section sometimes will not come on till 30' down the pass. It dose not happen all the time, but seems to do it when I'm not coming in "square" to the next pass. I have changed my "on-look" several times and seems to help, but when it is working, my booms are coming on perfect. Should have mentioned I have Accuboom also. The sprayer has flow back valves on them and not sure this might be some of the issue (old sprayer did not). What are some thoughts on what could be happening? There is a "turn off" percent setting that I believe I have set to 90%. Would this be causing the issue? Thanks for your help. | |
|
Raven Envisio Pro being lazy
