|
Northern Illinois | Hello, we recently purchased a 2013 Challenger 765D. We are planning on using it with a John Deere planter this spring and are wondering how to get our Fieldview drive hooked up. The tractor is hooked up to a John Deere 1770NT, with a John Deere 2630 screen, and a Starfire 3000 receiver using a John Deere bridge module. We got an adapter from our Climate rep, but we can't see any place to hook it up. The adapter has a 10-pin connector that hooks into the wiring harness on one end and a 9-pin connector for the drive on the other. I don't know if we have the wrong adapter, or if we are doing something wrong. We also spoke to the technology guy from the dealer where we bought the tractor, but he didn't seem to know anything about it. I saw a post from last year asking this same question from someone who had a similar setup to ours, and the answers said it should work, but didn't give any instructions on how to install it. Any help would be greatly appreciated! | |
|
Fieldview Drive to Challenger 765D
