| SoILfarmer - 3/23/2018 07:04
Thanks, I have the space shuttle valve installed and the plug in port 13.
Must have something else wrong
Run this test:
In the ParaDyme screen, press the steer left/right button in the menu. If it doesn't turn put one of the scv's in full flow, press steer left/right again, it will probably turn. If it DOES turn you have an issue wiht your LS Orifice/Checkvalve install, this is 100%, get the instructions for it from Deere and then figure yours out. This is VERY commonly messed up by Deere techs because there are 5 different possible combinations for the power beyond install based on which exact SCV valve stack you have.
If the scv in full flow doesn't do the trick you have something else wrong, however, I would bet a couple cold beers that it is the power beyond installation. |