AgTalk Home
AgTalk Home
Search Forums | Classifieds (9) | Skins | Language
You are logged in as a guest. ( logon | register )

Outback ac110 and raven sidekick pro
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Amc4life
Posted 2/8/2018 20:05 (#6564374 - in reply to #6564031)
Subject: RE: Outback ac110 and raven sidekick pro



Butterfield, MN
I kind of doubt that the combination of a 450 and a Sidekick Pro would have been on that sprayer. A Sidekick Pro is strictly CAN, and a 450 is not. Was there another console mounted with the 450, probably the old Sidekick console? If so, you may be able to keep running that stand-alone, as long as it can continue to get radar or wheel speed (or from GPS producing a simulated radar pulse) and it can continue to get boom sense as it did before when it was teed inline behind the 450. The other thing to be careful of is if it has a 16 pin Amp hitch connector that looks like a regular 440/450 plug, it could likely be a Gen II Raven CAN plug, and you'll also likely find a product controller node back on the sprayer. This will only work with a Raven controller like a 4000 or 5000 series SCS console, an Envizio Pro, or Viper Pro, or a Viper 4. Less likely, but still possible.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)