Maringa - Paraná - Brazil | Hello Guys, my customer is running a Müller Planter/Seeder ECU on his Intellivew IV. When you turn the TC on to record the data, or to use a VR Prescription map, the it stops sending power to the ECU. Müller had a problem with this software, that has too short of a memory, but already fixed it, and when connected to a GS3, for instance, it works fine, but when we go to the Intelliview this happens. I was talking to a friend of mine, who works at a New Holland dealer and he said he had this problem with a Horsh Planter working with ISOBUS. Everything works fine until you try to use the TC. Do you guys know anything about a memory shortage on the Intelliview and if its possible to upgrade by software or replace the Monitor?
TIA. |