AgTalk Home
AgTalk Home
Search Forums | Classifieds (37) | Skins | Language
You are logged in as a guest. ( logon | register )

afs yield monitor settings with gps
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 9/26/2006 07:15 (#46766 - in reply to #46710)
Subject: Re: afs yield monitor settings with gps


Southern Minnesota Between Freeborn & Wells
Yes, the correct answer is NO.

In harvest situations, the yield monitor will log only when certain conditions are met. One of these conditions is that the elevator is running above 200 RPM.

For all harvest situations the answer is NO because the elevator speed should be above 200 RPM.

I used my combine to map some tile lines once. I then set the answer to YES because I wanted to "record without grain flow" for this mapping project.

You will want to be certain that the "Log to Card" question is turned on. On the Ag Leader monitors there is a flashing arrow indicating each time that a reading is recorded to the card. I assume the AFS system is similar. This is to confirm that the card is being utilized.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)