Near Intersection of I-35 & I-90 Southern Mn. | I agree that the Deere and the Dickey John harnesses may use the same connector but the pins are not necessarily in the same locations. Generally the pins 1-X are the individual row sensors until the planters got really large. In other words, Pin 1 is row 1, Pin 2 is row 2 etc. So with a smaller planter pins 1-X would be the same on both the Deere and Dicky John harnesses.
The power and ground are different as mentioned above. An adapter could be made but it would be less confusing to get the correct match up. |