|
Mid-Missouri | http://www.thecombineforum.com/forums/12-claas-lexion/167538-macdon...
There is a link within this link with detail.
I did the above and also reversed the two pair of hydraulic hoses on the MacDon selector valve. This made the tilt function by default, reel fore/aft used secondary, with the shift function. Either way the hydraulics are plumbed, the manual lateral tilt switch on lexion console will need to be "off", or back/down, for the "shift" function to work. The shift function will be the tilt button on front of hydro, pushed downward. | |
|
Macdon tilt wiring on lexion
