Posted 9/23/2006 21:38 (#46152 - in reply to #46148) Subject: RE: EZ Steer Settings on Rogator 654
Peth,
If the T2 option is installed into an Ez-Steer controller, the controller orientation should be checked. On the Ez-Guide lightbar, go to: Wrench icon, Terrain Comp, Orientation.
The controller should have been calibrated when your Ez-Steer was installed. On the Ez-Guide lightbar, go to: Wrench icon, Terrain Comp, Calibration.
EZ Steer Settings on Rogator 654
