|
S Mn | I have several 10" U trough for bin unloads and i know i can get over 6000 an hour, mine run into a 10,000 bushel leg and if you run two at the same time i have to be careful or i can plug the leg. A 12" would probably do over 8000 unless its really long and has hanger bearings in it, If so hanger bearings in the u trough cut the capacity way way down. Re reading your question on a 60' you would have hanger bearings for sure so that will most likely cut it back to 6500-7000 I would not put anything less than a 15Hp motor on it. If your going to run allot of wet corn i would go 20hp. A 13" auger in wet corn will make a 140hp tractor work pretty hard with much incline. | |
|