Northern edge Mahnomen County | I replaced mine last winter. 2005 8010 2400 hrs. It is a new to me machine. When I was inspecting it, I found minor cracks in the upper shaker frame. The lighter bushings (rubber only) were starting to show some wear marks on the arms. The heavy bushings (steel outer casing) looked good, but most of them had the outer shell broke loose from the rubber of the bushing. I could turn the outer shell by hand. I replaced every bushing and bearing in the system and the upper shaker frame. It wasn't real difficult, but it took alot of time. |
Flagship shaker bushings
