Appomattox/Fredericksburg, VA | KMech - 7/17/2017 07:47
I have not seen an adapter for going the other way, nor would I expect to see one. The Integra display depends upon the CANbus power relay module on the display cable. The InCommand performs this function internally, thus it is possible to adapt one way, but not the other. The Integra won't be able to power the CANbus without an Integra cable.
I have done most of my InCommand installations using the Integra display cable, and an adapter. For a guy that has multiple machines all wired for Integra, keeping the adapter cable with the display lets the display go anywhere.
This is correct. That was the first question I asked when the new display harness came out and that was the answer I got. I've been ordering just like KMech for the guy that has both displays. Power cable can be the same, would just have to switch out your display cable. Then use the adapter. |
Incommand power cable to Integra display
