Near Intersection of I-35 & I-90 Southern Mn. | I was part of this linked discussion and the information is still correct. Wire the coil of a 12V relay across the Raven Orange/white and pure white wires. The Orange/white will be 12V when the Master switch is ON. Wire the output of the relay to pins 10 & 11. That way when the Master is ON, the relay closes and connects the two Trimble wires together.
You will also need to go into the menu and change the Coverage option to "SWITCH". It may be set to "STEERING" now.
Edited by tedbear 6/9/2017 06:48
|