|
Emporia, KS | I have a 9520 that is Greenstar Ready, but not Autotrac. I have an old brown box that I'd like to use only for tillage with SF2 and receiver.
I have a PF80818 revD that goes from my corner post to the brown box and processor. What type of harness would I need to tie in the ATU?
I have a 2630 harness with a 4 pin CAN connector on it that ties into the ATU harness. It works great.
Is there any way to tie into the CAN on my existing PF80818 to use with this brown box?? | |
|