I have been planting, making some progress, and my Integra has started acting up. Looking for ideas, think it's possible that my PMM module may have failed.
Planter has air clutches, but I believe it's unrelated. Clutches seem to be working fine with on/off.
Every time I set the pick up the planter or put it down, I get a 'Mxbus short to ground' error. I have traced the wires. I have wiggled and messed with the wires. I see no spots where the harness is rubbing. I have played with the implement switch. It fails all the seed tubes, and both shafts.
If you keep planting, after a few hundred yards, and a couple presses of OK, a couple dirty sensor errors, and a 'PMM recalibrating' it works fine and is giving an accurate seed count.
The beeping is driving me nuts!! What kind of experiences have you had?