|
Eastern Nebraska | Make sure that your documentation page is filled out for each product. Then go into each rate controller and make sure they are setup properly with their settings. Then double check that the "Disable this GRC" is NOT checked on each rate controller. From there, go into the Swath control settings and make sure their is a check mark in the Section Master box. You can also navigate to the diagnostics softkey by going to the menu button in the bottom right corner then hitting your Greenstar GS2/GS3 softkey, then the Diagnostics (book wrench) softkey. Then you change the drop down box to Swath/Section control and it will tell you what you're missing to make it function. If everything says it should be functioning properly, then on that diagnostics page if you navigate to the 2nd page it will have numbers to indicate how what they display recognizes when you're over coverage. | |
|
Rate controllers not turning sections off
