AgTalk Home
AgTalk Home
Search Forums | Classifieds (187) | Skins | Language
You are logged in as a guest. ( logon | register )

patching a lawn mower
View previous thread :: View next thread
   Forums List -> Stock TalkMessage format
 
TractorAddict
Posted 4/22/2017 16:48 (#5977063 - in reply to #5977057)
Subject: RE: patching a lawn mower


West of Broken Bow
Tank repair kit at auto parts store. It's a two part epoxy in a pouch or whatever that separates the activator on one end. You pop the seal in the middle by applying pressure and thus pushes the two ingredients together without rupturing the pouch. Includes sandpaper for roughing up the plastic area in need of repair to promote adhesion. Also includes fiberglass mesh to put down over the crack first after sanding. You cut it to fit and overlap the crack or hole enough.

You have to work the epoxy mixture by squishing it with your fingers but that's without opening it yet. You aren't supposed to work it for more than a certain amount of time because it will start heating up and hardening. Comes out black in color. Hardens up in less than an hour. Real easy to work with, just don't get it on your skin. Would be good idea to wear disposable gloves.

Edited by TractorAddict 4/22/2017 16:59




(IMG_20170422_165631.jpg)



Attachments
----------------
Attachments IMG_20170422_165631.jpg (170KB - 29 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)