|
Hazelton, Kansas |
Yellowgold:
I had a drill just like that...I think it was an '88 model.
To control depth and allow the disks to move over residue clumps, I removed one of the two springs on each opener, except for the openers that ran behind either a drill wheel or a tractor wheel.
This pretty much solved the problem, and I ran it that way for 15 years or so. Sold it to a neighbor, who still runs it that way.
I only did a limited amount of notill at the time (into bean stubble), and the single spring was a little marginal for that. However, the openers on that drill aren't really built for notill, anyway.
MDS
| |
|
Great Plains Solid Stand Drill
