Near Intersection of I-35 & I-90 Southern Mn. | SRFarms - 4/15/2017 07:37
Yes as long as you move the hot & ground pins on the 37 pin connector to the location JD uses, or we (or any stocking Precision Planting dealer) have adapters here that will do that.
I would agree. All the planter monitors that I have worked with use the first pin numbers for the rows. Pin 1 is signal for Row 1, Pin 2 for Row 2 etc. This worked out fine until planters got lots of rows and then things got confusing.
As mentioned above there can be some conflict with the hot and ground pins between Deere and the Kinze. The adapter will likely be needed to get the power and ground from the 200 to the correct locations on the Kinze. The row numbers will likely go straight through. |
Will a Computrak 200 work on Kinze 2600?
