|
south africa | I already know the pin outs of the ezboom plug ;1- 12V +
2- INC/DEC (OPEN VALVE)
3- FLOW SIGNAL
4- SHIELD GROUND
5- 12V -
6- BLANK
7- INC/DEC (CLOSE VALVE)
8- 5VDC (OUT)
If this is possible to do , I need to know where the pressure regulator's two wires, and the flow meter's three wires should go?
I'm not using the main shutoff valve so that is okey.
I also would like to know what make the flow meter is to look up its cal. code? There is no writing on it.
can anybody help PLEASE
(IMG_20170404_125637.jpg)
(IMG_20170412_092418.jpg)
Attachments ---------------- IMG_20170404_125637.jpg (136KB - 28 downloads) IMG_20170412_092418.jpg (108KB - 30 downloads)
| |
|