|
IA | I would think the 7500 is wired the same as the 6500. Im not sure if agleader lets you configure the port C on the 7500.
I had to use a computer with a com cable to connect to the 6500 to configure the Port C connection.
Hope this helps
The Center of the picture shows the config I used.
Edited by REVBCO 8/28/2020 13:58
(Screen Shot 2020-08-28 at 1.49.37 PM (full).png)
Attachments ---------------- Screen Shot 2020-08-28 at 1.49.37 PM (full).png (110KB - 23 downloads)
| |
|