|
| Going with Ez-Boom will not fix the problem as you can not nudge treatment infomation as there is an extra dimention compared to an AB line. Hence nudge can only shifts the AB left or right. In Aus the EzGuide 500 does not get WAAS corrections and hence is less accurate than in US.
Options that will work:
mojoRTK - Excellent solution, but may be overkill,
SF2 Signall direct into AS7500 - Very Good, but cheaper options that could be tried first
SF1 signall direct into the AS7500 CANbus - Good, this will be better then EzGuide GPS only solution
I dont think the mojoRTK, or StarFire can output RTCM (mojoRTK Base can output RTCM3 and mojoRTK console can use as input)
Can the EzGuide500 use external NMEA, as this could be the solution to accuray on that unit.
So probably best solution is to use the SF1 signal direct into the AS7500 and put up with drift on the EzGuide500.
Edited by PB from Oz 6/16/2008 00:32
| |
|
ez-guide 500 questions/mojo/jd/topcon
